Home › Guides › Torsion and extension springs explained

Torsion and Extension Springs, Explained

Springs, not the opener, do the heavy lifting on a garage door.

What springs do

Springs counterbalance the weight of the door so it can be lifted by hand or by an opener. A properly balanced door stays put when stopped halfway.

Torsion springs

Mounted on a bar above the door. They twist to store energy and turn cable drums at each end.

Extension springs

Run alongside the horizontal tracks and stretch as the door closes. They should have safety cables running through them to contain a spring if it breaks.

Why they break

Springs are rated for a number of open-close cycles; every use wears them. Rust and lack of lubrication shorten their life.

Safety

Springs and the cables and bottom brackets connected to them store a lot of energy. Adjusting or replacing them without proper tools and training can cause serious injury.

Garage door giving you trouble?

Tell us what the door is doing and where you are. It takes about a minute, and there is no obligation.

Request service

More reading

Safety sensors and auto-reverse

How to test them and why they matter.

West Texas garage door care

Heat, wind, dust and hail.

Repair or replace a garage door?

When a repair makes sense and when a new door does.

Request service